round pipe straightening machine
Production Description
The steel pipe straightening machine can effectively remove the internal stress of the steel pipe, ensure the curvature of the steel pipe, and keep the steel pipe from deformation during long-term use. It is mainly used in construction, automobiles, oil pipelines, natural gas pipelines and other fields.
Advantages
1. High Precision
2. High Production efficiency,Line speed can be up to 130m/min
3. High Strength,The machine works stably at a high speed, which improves product quality.
4. High Good product rate, reach to 99%
5. Low wastage, Low unit wastage and low production cost.
6. 100% interchangeability of the same parts of the same equipment
Related products
-
ERW32 welded tube mill
Production Description The forming fundamental of ERW tube mill The forming fundamental of tube mill: the slit strip is formed into approximate round steel tube without welding by the forming mill,and then the tube’s edge is melted and welded by the HF induction welder and the welded seam is squeezed Immediately after welding at welding section of tube mill .At this stage, the steel pipe welding is completed, the welded tube through cooling ...
-
Zinc spraying machine
A Zinc Spraying Machine is a critical tool in pipe and tube manufacturing, providing a robust layer of zinc coating to protect products from corrosion. This machine utilizes advanced technology to spray molten zinc onto the surface of pipes and tubes, ensuring even coverage and long lasting durability. Manufacturers rely on zinc spraying machines to enhance the quality and lifespan of their products, making them indispensable in industries like construction and autom...
-
Tool holder
Tool holders are supplied with their own fixing system which utilises a screw, stirrup and carbide mounting plate. Tool holders are supplied as either 90° or 75° inclination, depending on your mounting fixture of the tube mill, the difference can be seen in the photos below. The tool holder shank dimensions are also normally standard at 20mm x 20mm, or 25mm x 25mm (for 15mm & 19mm inserts). For 25mm inserts, the shank is 32mm x 32mm, this size is also available f...
-
ERW89 welded tube mill
Production Description The forming fundamental of ERW tube mill The forming fundamental of tube mill: the slit strip is formed into approximate round steel tube without welding by the forming mill,and then the tube’s edge is melted and welded by the HF induction welder and the welded seam is squeezed Immediately after welding at welding section of tube mill .At this stage, the steel pipe welding is completed, the welded tube through cooling ...
-
Roller set
Production Description Roller set Roller Material: D3/Cr12. Heat treatment hardness: HRC58-62. Keyway is made by wire cut. Pass accuracy is ensured by NC machining. Roll surface is polished. Squeeze roll Material: H13. Heat treatment hardness: HRC50-53. Keyway is made by wire cut. Pass accuracy is ensured by NC machining. ...
-
Induction coil
The consumables induction coils are made only from high conductivity copper. We can also offer a special coating process for contact surfaces on the coil which reduces oxidisation that can lead to resistance on coil connection. The banded induction coil, tubular induction coil are available at option. The induction coil is a tailored- made spare parts . The induction coil is offered as per the diameter of steel tube and profile.